Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS
Choose a sub category:
JOIST HANGERS FRAMING ANGLES/ANCHORS MENDING PLATES
NAIL PLATES POST ANCHORS / CAPS FENCE BRACKETS
BRIDGING INSULATION SUPPORTS STRAPS
PLYWOOD CLIPS FOUNDATION ANCHORS BRICK/WALL TIES
MISC CONSTR HARDWARE
Sort By:
1 2 3 4
USP Lumber PCP Post Cap USP Lumber PCP Post Cap, High-Impact Plastic, Gray

Seamless, keeps water off post tops to protect wood from moisture damage. Corrosion-proof and paintable. Requires one 8d HDG or 10d HDG nail for installation. 3-5/8"W - For 4 x 4 Post/Column.

Our Price: $2.04
USP Lumber HUS26 Double Shear Slant Joist Hanger USP Lumber HUS26 Double Shear Slant Joist Hanger, 2 X 2 - 8 in, 16 ga T, 2635 lb, Steel

Offers double shear nailing. Dimples on hanger allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing. G90 galvanizing finish. Requires 16d nails for installation. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779 and Dade County, FL06-0921.05 codes.

Our Price: $3.20
USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger, 2 in L X 10 in H, 1800 lb, 18 ga Steel

Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $5.23
RH Tamlyn PCS716 Plywood Clip RH Tamlyn PCS716 Plywood Clip, 20 ga Steel, Galvanized

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.

Our Price: $10.46
RH Tamlyn PCS12 Plywood Clip RH Tamlyn PCS12 Plywood Clip, 20 ga Steel, Galvanized

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.

Our Price: $10.46
RH Tamlyn PCS1532 Plywood Clip RH Tamlyn PCS1532 Plywood Clip, 20 ga Steel, Galvanized

Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.

Our Price: $10.46
Acorn IHW16100 Insulation Support Wire 16 in L Acorn IHW16100 Insulation Support Wire 16 in L, Carbon Steel

Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2" less than over center joist spacing. 13 Gauge.

Our Price: $15.42
USP Lumber HPAHD22 Foundation Strap USP Lumber HPAHD22 Foundation Strap, 2-1/16 in, 2635 lb Uplift, 10 ga Steel, Galvanized

Designed to anchor wood framing to poured concrete, foundation straps tie mudsill, and stud simultaneously to the foundation. Single pour edge installation. G90 galvanized finish. Embedment 10". Requires 16d nails for installation. Meets ICC-ES ESR-2787 codes. 10 Gauge - 24-3/4"H1 x 10"H2.

Our Price: $18.31
USP Lumber NA11-5MC Joist Hanger Nail USP Lumber NA11-5MC Joist Hanger Nail, 8D x 1-1/2 in, 0.131 in Shank, Steel, Hot Dip Galvanized

Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $19.35
USP Lumber NA9-5MC Joist Hanger Nail USP Lumber NA9-5MC Joist Hanger Nail, 10D x 1-1/2 in, 0.148 in Shank, Steel, Hot Dip Galvanized

Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $19.35
Acorn IHW24100 Insulation Support Wire 24 in L Acorn IHW24100 Insulation Support Wire 24 in L, Carbon Steel

Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2" less than over center joist spacing. 13 Gauge.

Our Price: $23.05
Deckmate 90166 Deck Bench Bracket with Bench Bracket Deckmate 90166 Deck Bench Bracket with Bench Bracket, Structural Resin

You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7" of deck space. Assembled unit stands 36"H for deck railing, seat is 17"H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. LUMBER NOT INCLUDED.

Our Price: $24.80
USP Lumber RS22-R Coiled Strap USP Lumber RS22-R Coiled Strap, 1-1/4 in, 925 lb, 22 ga Steel, Galvanized

Enables cut-to-length convenience for job site needs. G90 galvanizing finish. 1-1/2" nail spacing. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $26.70
Acorn IHW16500 Insulation Support Wire 16 in L Acorn IHW16500 Insulation Support Wire 16 in L, Carbon Steel

Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2" less than over center joist spacing. 13 Gauge.

Our Price: $31.44
RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie, 7/8 in, 1370 lb, 22 ga Steel

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed.

Our Price: $35.07
Hopkins 90128 Shelf Link 4 ft L x 2 ft W Hopkins 90128 Shelf Link 4 ft L x 2 ft W

You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8'. Includes ShelfLinks, hardware and instructions. LUMBER NOT INCLUDED.

Our Price: $36.94
USP Lumber RS16-R Coiled Strap USP Lumber RS16-R Coiled Strap, 1-1/4 in, 1730 lb, 16 ga Steel, Galvanized

Enables cut-to-length convenience for job site needs. G90 galvanizing finish. 1-1/2" nail spacing. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $37.11
RH Tamlyn BT28500SP Corrugated Straight Brick Wall Tie RH Tamlyn BT28500SP Corrugated Straight Brick Wall Tie, 7/8 in, 604 lb, 28 ga Steel

Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed.

Our Price: $39.98
USP Lumber JL24 Standard Joist Hanger Joist Hanger 2x4in 20 Gauge - Case of 50

G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $44.00
Deckmaster DMP125-10 Hidden Deck Bracket Kit Deckmaster DMP125-10 Hidden Deck Bracket Kit, For Use with Deck Boards, 22-1/2 in L

System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies. For: 3/4" thick boards, composites less than 1-1/8", and any hollowcore composites. Consumer pack includes: 10 brackets, (120) 10 x 1" deck board screws, (110) 8 x 1" joist screws, and a pro bit tip.

Our Price: $47.06
Deckmaster DMP175-10 Hidden Deck Bracket Kit Deckmaster DMP175-10 Hidden Deck Bracket Kit, For Use with Deck Boards, 22-1/2 in L

System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies. For: 3/4" thick boards, composites less than 1-1/8", and any hollowcore composites. Consumer pack includes: 10 brackets, (120) 10 x 1" deck board screws, (110) 8 x 1" joist screws, and a pro bit tip.

Our Price: $47.06
Deckmaster DMP100-10 Hidden Deck Bracket Kit Deckmaster DMP100-10 Hidden Deck Bracket Kit, For Use with Deck Boards, 22-1/2 in L

System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies. For: 3/4" thick boards, composites less than 1-1/8", and any hollowcore composites. Consumer pack includes: 10 brackets, (120) 10 x 1" deck board screws, (110) 8 x 1" joist screws, and a pro bit tip.

Our Price: $47.06
USP Lumber MP34 Framing Angle Frame Angle 1-3/8x2-13/16in gv - Case of 100

Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505; ICBO 5736; DSA PA-076; Dade County, FL 01-0417.11; and  L.A. City RR25303 codes. 18 Gauge.

Our Price: $48.00
Simpson Strong-Tie LSTA Light Duty Strap Tie Strap Tie 1-1/4x9in Lt Dty 20g - Case of 50

Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $48.50
USP Lumber RT7A Double Plate Hurricane/Seismic Anchor Hurricane/seimic Anch Dbl pl - Case of 100

Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $51.00
USP Lumber JL26 Standard Joist Hanger Joist Hanger 2x6-8in 20 Gauge - Case of 50

G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $51.50
USP Lumber LSTA12 Light Capacity Strap Tie Strap Tie 1-1/4x12in Lt Dt 20g - Case of 50

Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $53.00
USP Lumber RT7 Double Plate Hurricane/Seismic Anchor SEISMIC ANCHOR 1-9/16X5-1/4IN - Case of 100

Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.

Our Price: $53.00
USP Lumber NP Truss Mending Plate Truss Mending Plate 5x2in 20ga - Case of 100

Joins flat surfaces of 2 or more wood members. Not for structural use or use in truss assembly. G90 galvanizing finish. Use nails appropriate for intended use. Holes sized for 8d common or 8d x 1-1/2" nails. 20 Gauge.

Our Price: $56.00
USP Lumber RT3A Double Plate Hurricane/Seismic Anchor USP Lumber RT3A Double Plate Hurricane/Seismic Anchor, 1-7/16 in, 610 lb Uplift Douglas Fir

Ties trusses and rafters to top plates either left or right handed. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. G90 galvanizing finish. Requires 8d nails for installation in plate and rafter/truss. Meets ICC-ES ESR-1465 and FL817 codes. 18 Gauge.

Our Price: $58.00
   
 
1 2 3 4